边做饭边被躁bd在线看,妈妈的朋友6集视频,亚洲精品国产品国语在线试看

Home >> Product >>FRP high-pressure pipe

FRP high-pressure pipe

FRP high-pressure pipe is a new kind of product, which is developed and researched by Kinflare Group itself,basing on the low-pressure pipe production and according to the practical using in oil field.
This product is made by high strength fiber and epoxy resin under winding process.

Brief Introduction

● Diameter range:　38mm-200mm(1.5inch-8inch)

● Working pressure range:　3.5MPa-25MPa

● The highest working temperature：　100℃

● Products characteristic：

　　◆　Good high-pressure resistance,good corrosion resistance,long service life.

　　◆　Light weight,easy installation and transportation

　　◆　Screw connection, good sealing.

　　◆　Small friction coefficient,no dirt deposition inside pipe,excellent hydraulic characteristics.

● Using field:

　　◆　Bring or fresh water transferring pipe.

　　◆　Sewage water disposal transferring pipe.

　　◆　Fire fighting pipe.

　　◆　Crude oil and natural gas carrying pipe.

　　◆　Processing pipe of petroleum chemical.

　　◆　Tank connection pipe for single well.

　　◆　Oil collection pipe for single well.

　　◆　Water injection pipe.

　　◆　Seawater desalting equipment.

Epoxy resin pipe system	Blue pipe	Red pipe
RTRP ( Reinforced the rmosetting resin pipe), classified according to ASTM2310	RTRP-11AX	RTRP-11AF
Diameter range	38-200mm	38-200mm
Circulating pressure MPa	5.5-27.6	5.5-24.2
Resin system	epoxy	Fragance epoxy
The highes t working temperature ℃	80℃	100℃
Innerliner nominal thickness	No inner liner	No inner liner
Joint method	8 thread whorl	8 thread whorl
Using field	Crude oil and natural gas water injection transferring and oil gathering pipe;brine or fresh water;CO2	Crude oil and natural gas water injection transferring and oil gathering pipe;brine or fresh water;CO2

Diameter	Pressure
1.5"(40mm)	3.5MPa/5.5MPa/7MPa/8.5MPa/10MPa/14MPa
2"(50mm)
2.5"(65mm)
3"(80mm)
4"(100mm)
6"(150mm)
8"(200mm)
1.5"(40mm)	17MPa
2"(50mm)
2.5"(65mm)
3"(80mm)
4"(100mm)
6"(150mm)
1.5"(40mm)	21MPa
2"(50mm)
2.5"(65mm)
3"(80mm)
4"(100mm)
1.5"(40mm)	25MPa
2"(50mm)
2.5"(65mm)
3"(80mm)
4"(100mm)

Longitudinal tensile strength	MPa	90
Longitudinal tensile modulus	MPa	10440
Longitudinal compression strength	MPa	130
Hoop tensile strength	MPa	340
Hoop tensile modulus	MPa	21500
Coefficient of thermal expansion(tested under 30℃ )	mm/mm/℃	12.7×10^-6;
Coefficient of thermal conductivity	W/(m·K)	0.36
Density	kg/m³	1.9~2.0×10³
Poissonis ratio		0.62-0.48 0.60
Longitudinal tensile poissonis ratio
Hoop tensile poissonis ratio
Hacen williams coefficient		150

Chemical Resistance Table


Chemical environment	Recommended highest temperature
Ethane 100%	24
Hydrochloric acid 10%	NR
Sulfureted hydrogen (dry) 100%	66
Sulfureted hydrogen (wet and saturation)	52
Coal oil	66
Carbinol 20%	38
Mineral alcohol	24
Petrolic alcohol	38
Sulphuric acid 3%	24
Toluene 100%	NR
Chloridized water 100 ppm	77
Distilled water	38
Hard water	80
Seawater	80
Acetum 20％	NR
Benzene 10％	21
Citric acid 25％	66
Crude oil (with and without sulphur)	77
Ethanol 100％	24
Combustible oil	66
Hcptane 100％	52
Hydrochloric acid 3％	24
Hydrofluorid acid	NR
Pyruvic acid 10％	38
Aeromautic oil 100％	66
Methane	60
Chloromethane 10％	NR
Inorganic mud acid 5％	38
(Exposure endurance under 8 hours)
Sodium hydroxide 5-50％	NR
Sulphuic acid 100％	NR
Alcoholic amine 100％	NR
Soft water	38
Haloid water	80
Brine	80
Toluene	NR
Amine hydroxidc 28％	NR
CO2 (dry)	80
CO2 (wet)	66
Diesel oil 100％	66
Ethanol (all)	80
Gasoline 100％	60

Note:NR indicate the unadvisable application 　　Non-critical state:FRP pipe is not applicable to the transportion of CO2 in ultral state. 　　The table provide the references for the application of high-pressure FRP pipe and the common chemical resistance index of the highpressure FRP pipe. The influences of chemical compounds,thermodynamics,associated loading and stress are not considered.The highest temperature in the table is based on the newly announced experimental results of laboratory,practical application in oil-field and the data from raw material providers.

Flange


Diameter (in)	Pressure (MPa)	U.S.standard hole distribution	D1 mm	孔數	直徑 mm	D mm	T mm
1.5	5.5	300	125	8	19	175	55
1.5	10	600	125	8	19	175	55
1.5	17	900	135	8	25	180	55
1.5	25	1500	135	8	25	180	55
2	5.5	300	127	8	19	175	58
2	10	600	127	8	19	175	58
2	17	900	165	8	25	224	58
2	25	1500	165	8	25	224	71
2.5	5.5	300	149	8	22	201	64
2.5	10	600	149	8	22	201	64
2.5	17	900	190	8	29	254	64
2.5	25	1500	190	8	29	254	79
3	5.5	300	168	8	22	218	71
3	10	600	168	8	22	218	71
3	17	900	190	8	25	251	71
3	25	1500	203	8	32	267	84
4	5.5	300	209	8	22	264	79
4	10	600	216	8	25	282	79
4	17	900	235	8	32	302	79
4	25	1500	241	8	35	312	91
6	5.5	300	270	12	22	328	79
6	10	600	292	12	29	366	79
6	17	900	317	12	23	391	89

Elbow


Diameter(in)	Pressure(MPa)	A(mm)	E(mm)
1.5	7	102	55
1.5	17	102	55
1.5	21	102	55
2	7	140	71
2	17	140	71
2	21	140	71
2.5	7	160	79
2.5	17	160	79
2.5	21	160	79
3	7	173	86
3	17	173	86
3	21	173	86
4	7	201	91
4	17	201	91
4	21	201	91
6	7	274	84
6	17	274	84

Diameter(in)	Pressure(MPa)	A(mm)	E(mm)
1.5	7	96	55
1.5	17	96	55
1.5	21	96	55
2	7	109	71
2	17	109	71
2	21	109	71
2.5	7	122	79
2.5	17	122	79
2.5	21	122	79
3	7	130	86
3	17	130	86
3	21	130	86
4	7	145	91
4	17	145	91
4	21	145	91
6	7	173	84
6	17	173	84

T-way


Diameter(in)	Pressure(MPa)	A(mm)	E(mm)
1.5	7	115	55
1.5	17	115	55
1.5	21	115	55
2	7	142	71
2	17	142	71
2	21	142	71
2.5	7	160	79
2.5	17	160	79
2.5	21	160	79
3	7	170	86
3	17	170	86
3	21	170	86
4	7	201	91
4	17	201	91
4	21	201	91
6	7	249	84
6	17	249	84

Field Whorl

Note: D:Diameter P:pressure M:Model

D(in)	M	L(mm)	B(mm)	D(in)	P(MPa)	M	D(in)	P(MPa)	M
2	A	97	64	2	3.5	A	3	10	C
2	B	97	61	2.5	3.5	A	4	10	B
2	C	97	58	3	3.5	A	6	10	C
2	D	97	56	4	3.5	A	2	14	C
2.5	A	102	76	6	3.5	B	2.5	14	B
2.5	B	102	74	2	5.5	A	3	14	C
2.5	C	102	71	2.5	5.5	A	4	14	C
3	A	109	94	3	5.5	A	6	14	D
3	B	109	91	4	5.5	B	2	17	B
3	C	109	89	6	5.5	B	2.5	17	C
3	D	109	84	2	7	B	3	17	D
3	E	109	81	2.5	7	C	4	17	E
4	A	114	119	3	7	C	6	17	C
4	B	114	117	4	7	B	2	21	B
4	C	114	112	6	7	B	2.5	21	B
4	D	114	109	2	8.5	B	3	21	C
4	E	114	104	2.5	8.5	C	4	21	D
6	A	109	175	3	8.5	B	2	25	A
6	B	109	173	4	8.5	B	2.5	25	A
6	C	109	168	6	8.5	B	3	25	A
6	D	109	163	2	10	C	4	25	C
				2.5	10	C
					Every kind of whorl is used on pipe,if it is used as outer whorl or on the thicken area of the bottom,you can use A model field whorl.

Nipple


Diameter in	Model	L mm	B mm	Diameter(in)	Pressure(MPa)	Model
2	A	457	76	2	5.5	A
2	B	457	79	2.5	5.5	A
2	C	457	69	3	5.5	A
2	D	457	76	4	5.5	B
2.5	A	457	94	6	5.5	B
2.5	B	457	89	2	7	B
2.5	C	457	89	2.5	7	C
3	A	457	114	3	7	C
3	B	457	114	4	7	B
3	C	457	102	6	7	B
3	D	457	94	2	8.5	B
3	E	457	94	2.5	8.5	C
4	A	457	135	3	8.5	B
4	B	457	147	4	8.5	B
4	C	457	147	2	10	C
4	D	457	130	2.5	10	C
4	E	457	135	3	10	C
6	A	457	193	4	10	B
6	B	457	193	2	14	C
6	C	457	185	2.5	14	B
6	D	457	185	3	14	C
				4	14	C
				2	17	B
				2.5	17	C
				The nipple have all kinds of sizes and grades. 　The standard length of the general nipple is 400mm,we can produce nipples of other length.

Product

About Product

Brief Introduction
Connection Method & Standard
Quality guarantee
Technical & Performance
Diameter & Pressure
Physical Specialities
Chemical Resistance Table
Examples of installation
Flange
Elbow
T-way
Field Whorl
Nipple

月夜直播在线观看视频,免费男人添女人下身视频高清_720在线播放观看